ACTIVE STABILIZER SUSPENSION SYSTEM DTC CHECK / CLEAR

CHECK FOR DTC

1. Front Active Stabilizer Control ECU Assembly:

   
   

   1. Turn the engine switch off.

   2. Connect the GTS to the DLC3.

   3. Turn the engine switch on (IG).

   4. Turn the GTS on.

   5. Enter the following menus: Chassis / Front Stabilizer / Trouble Codes.

      
      Chassis > Front Stabilizer > Trouble Codes

      Note

      When a malfunction occurs, clear the DTC after the repair.

      Tech Tips

      When freeze frame data is stored, check the freeze frame data.

      Click here

2. Rear Active Stabilizer Control ECU Assembly:

   
   

   1. Turn the engine switch off.

   2. Connect the GTS to the DLC3.

   3. Turn the engine switch on (IG).

   4. Turn the GTS on.

   5. Enter the following menus: Chassis / Rear Stabilizer / Trouble Codes.

      
      Chassis > Rear Stabilizer > Trouble Codes

      Note

      When a malfunction occurs, clear the DTC after the repair.

      Tech Tips

      When freeze frame data is stored, check the freeze frame data.

      Click here

CLEAR DTC

1. Front Active Stabilizer Control ECU Assembly:

   
   

   1. Turn the engine switch off.

   2. Connect the GTS to the DLC3.

   3. Turn the engine switch on (IG).

   4. Turn the GTS on.

   5. Enter the following menus: Chassis / Front Stabilizer / Trouble Codes.

      
      Chassis > Front Stabilizer > Clear DTCs

      Note

      DTCs and freeze frame data are cleared at the same time.

      Tech Tips

      DTCs may not be cleared if the malfunction continues.

   6. Turn the engine switch off.

2. Rear Active Stabilizer Control ECU Assembly:

   
   

   1. Turn the engine switch off.

   2. Connect the GTS to the DLC3.

   3. Turn the engine switch on (IG).

   4. Turn the GTS on.

   5. Enter the following menus: Chassis / Rear Stabilizer / Trouble Codes.

      
      Chassis > Rear Stabilizer > Clear DTCs

      Note

      DTCs and freeze frame data are cleared at the same time.

      Tech Tips

      DTCs may not be cleared if the malfunction continues.

   6. Turn the engine switch off.