HEATED OXYGEN SENSOR INSTALLATION

PROCEDURE

  1. INSTALL HEATED OXYGEN SENSOR

    1. A205100E05

      Using SST, install the heated oxygen sensor to the front exhaust pipe.

      09224-00011

      without SST

      44 N*m

      449 kgf*cm

      32 ft.*lbf

      with SST

      40 N*m

      408 kgf*cm

      30 ft.*lbf

      Tip:

      Use a torque wrench with a fulcrum length of 300 mm (11.8 in.).

      Note:

      Do not damage the sensor.

    2. A205098

      Install the wire harness clamp bracket.

    3. Attach the clamp.

    4. Connect the sensor connector.