WASHER NOZZLE(for Rear) ON-VEHICLE INSPECTION

PROCEDURE

  1. INSPECT REAR WASHER NOZZLE

    1. With the engine running, check that the center stream of washer fluid sprays on the windshield within the hatched area shown in the illustration.

      Standard

      Washer fluid hits the windshield in the area shown in the illustration.

      E184763E03
      Table 1. Text in Illustration

      *1

      Ceramic Line

      *2

      Wiper Pattern

      Standard

      Area

      Specified Condition

      A

      7.7 mm (0.303 in.)

      B

      17.9 mm (0.705 in.)

      C

      41.2 mm (1.62 in.)

      If the result is not as specified, replace the rear washer nozzle.