RADIO ANTENNA POLE INSTALLATION


  1. INSTALL RADIO ANTENNA POLE


    1. B007SKB

      Using a T20 "TORX" socket wrench, install the 2 screws.

      Torque:
      2.0 N*m  { 20 kgf*cm, 18 in.*lbf }
    2. B007OSTE01

      Install the 2 clamps and radio antenna pole.

    3. Connect the connector.

  2. INSTALL INSTRUMENT PANEL FINISH PANEL LOWER


    1. Connect the fuel lid lock control cable and bonnet (hood) control cable assembly to the instrument panel finish lower.

    2. Attach the 4 clips to install the instrument panel finish panel lower.

    3. Install the 2 clips.