IMMOBILISER SYSTEM(w/o Entry and Start System) PRECAUTION

  1. PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable from the negative (-) battery terminal, initialize the following systems after the cable is reconnected.

    System Name

    See Procedure

    Stop and Start System

    Click hereClick hereClick here

    Power Door Lock Control System

  2. PRECAUTION WHEN USING GTS

    1. After all DTCs are cleared, check if the malfunction occurs again 6 seconds after turning the ignition switch ON.

  3. PRECAUTION FOR THE DOOR CONTROL TRANSMITTER ASSEMBLY

    1. The door control transmitter assembly is a precision instrument. Be sure to observe the following:

      1. Do not drop or strike the door control transmitter assembly.

      2. Do not allow the door control transmitter assembly to be kept in a high temperature place for a long time.

      3. Do not use an ultrasonic washing machine to clean the door control transmitter assembly.

      4. Keep the door control transmitter assembly away from magnets or magnetized items during use.

      5. Do not attach any stickers to the door control transmitter assembly.

  4. PRECAUTION FOR REGISTRATION

    1. If replacing any of the following parts, refer to Service Bulletin.

      Note:

      Any door control transmitter assemblies or ECUs for which registration has been performed cannot be reused.

      1. Door control transmitter assembly

      2. Transponder key ECU assembly

      3. ECM