COUNTER GEAR REMOVAL


  1. REMOVE NO. 2 COUNTER GEAR FRONT BEARING SNAP RING

    A01E2XIE01

    1. Using a snap ring expander, remove the snap ring from the counter gear.

  2. REMOVE COUNTER GEAR FRONT BEARING

    A01E0LZE01

    1. Using SST and a press, press out the front bearing from the counter gear.

      SST
      09950-00020
      09950-60010   ( 09951-00220 )
      09950-70010   ( 09951-07100 )

  3. INSPECT COUNTER GEAR

    A01E0D4E01

    1. Using a micrometer, measure the outside diameter of the counter gear as shown in the illustration.

      Standard outside diameter
      29.984 to 30.000 mm (1.1805 to 1.1811 in.)
      Minimum outside diameter
      29.984 mm (1.1805 in.)

      If the outside diameter is less than the minimum, replace the counter gear with a new one.