8NR-FTS INTAKE / EXHAUST SERVICE DATA

Table 1. COOLANT
Standard Capacity	Classification
2.1 liters (2.2 US qts, 1.8 Imp. qts)	Use only "TOYOTA Super Long Life Coolant", or similar high quality ethylene glycol based non-silicate, non-amine, non-nitrite, non-borate coolant with long-life hybrid organic acid technology (coolant with long-life hybrid organic acid technology is a combination of low phosphates and organic acids).

Table 2. TURBOCHARGER
Boost pressure	Standard		120 kPa (1.2 kgf/cm², 17 psi) or higher
Turbine with valve housing sub-assembly	Warpage	Standard	0.15 mm (0.00591 in.) or less
Waste gate valve	Clearance	Standard	0.15 mm (0.00591 in.)
Turbine shaft	Axial play	Standard	0.15 mm (0.00591 in.) or less
Waste gate valve actuator	Travel	Standard	15 mm (0.591 in.) or more
Intake air control valve (air by-pass valve assembly)	Tester Connection		1 - 2
	Condition		20°C (68°F)
	Specified Condition		8.7 to 9.2 Ω

Table 3. EXHAUST PIPE
Compression spring	Exhaust manifold converter sub-assembly (TWC: Front Catalyst) x Front exhaust pipe sub-assembly (TWC: Rear Catalyst)	Standard length	43 mm (1.69 in.)
		Minimum free length	41.5 mm (1.63 in.)
	Front exhaust pipe sub-assembly (TWC: Rear Catalyst) x Tail exhaust pipe assembly	Standard length	40 mm (1.57 in.)
		Minimum free length	38.5 mm (1.52 in.)

Table 4. RESERVE TANK CAP (for Intercooler)
Item	Specified Condition
Standard pressure (for brand-new reserve tank cap (for Intercooler))	93 to 123 kPa (0.9 to 1.3 kgf/cm², 13.5 to 18 psi)
Minimum pressure (for used reserve tank cap (for Intercooler))	79 kPa (0.8 kgf/cm², 11.5 psi)