4WD CONTROL ECU(for LHD) REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notice before proceeding with work.

    Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  3. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  4. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

    Click here

  5. REMOVE ECU INTEGRATION BOX RH


    1. B008INL

      Disconnect the connectors.

    2. Detach the 4 clamps.

    3. B008IN0C01
      B008IUL Nut
      B008H52 Bolt

      Remove the 2 nuts, bolt and ECU integration box RH.

  6. REMOVE 4WD ECU ASSEMBLY


    1. B008GVM

      Detach the 2 claws and remove the 4WD ECU assembly.