ACTIVE STABILIZER SUSPENSION SYSTEM TERMINALS OF ECU


  1. FRONT ACTIVE STABILIZER CONTROL ECU ASSEMBLY

    B006AMAC03
    *a

    Component without harness connected

    (Front Active Stabilizer Control ECU Assembly)

    		 - -

    Tech Tips

    The voltage cannot be measured with the connector connected to the front active stabilizer control ECU assembly as the connector is water resistant.

    Terminal No. Symbol Terminal Description
    A30-1 - -
    A30-2 CANH CAN communication line Hi
    A30-3 CANL CAN communication line Lo
    A30-4 PIG Power source
    A30-5 PGND Power ground
    A30-6 CN2+ CAN communication line Hi
    A30-7 CN2- CAN communication line Lo
    A30-8 LCN- CAN communication line Lo
    A30-9 IG IG power source
    A30-10 - -
    A30-11 LCN+ CAN communication line Hi
    z43-1 V V phase motor output
    z43-2 U U phase motor output
    z43-3 W W phase motor output
    z44-1 MSG2 Motor rotation angle sensor shielded wire ground
    z44-2 MRG Motor rotation angle sensor ground
    z44-3 MRV Motor rotational angle sensor power supply output
    z44-4 - -
    z44-5 - -
    z44-6 - -
    z44-7 MS2 Motor rotation angle sensor 2 input
    z44-8 MS1 Motor rotation angle sensor 1 input
    z44-9 - -
    z44-10 - -
    z44-11 - -
    z44-12 - -
    z44-13 - -

  2. REAR ACTIVE STABILIZER CONTROL ECU ASSEMBLY

    B006AMAC04
    *a

    Component without harness connected

    (Rear Active Stabilizer Control ECU Assembly)

    		 - -

    Tech Tips

    The voltage cannot be measured with the connector connected to the rear active stabilizer control ECU assembly as the connector is water resistant.

    Terminal No. Symbol Terminal Description
    P8-1 - -
    P8-2 CANH CAN communication line Hi
    P8-3 CANL CAN communication line Lo
    P8-4 PIG Power source
    P8-5 PGND Power ground
    P8-6 CN2+ CAN communication line Hi
    P8-7 CN2- CAN communication line Lo
    P8-8 LCN- CAN communication line Lo
    P8-9 IG IG power source
    P8-10 - -
    P8-11 LCN+ CAN communication line Hi
    z45-1 V V phase motor output
    z45-2 U U phase motor output
    z45-3 W W phase motor output
    z46-1 MSG2 Motor rotation angle sensor shielded wire ground
    z46-2 MRG Motor rotation angle sensor ground
    z46-3 MRV Motor rotational angle sensor power supply output
    z46-4 - -
    z46-5 - -
    z46-6 - -
    z46-7 MS2 Motor rotation angle sensor 2 input
    z46-8 MS1 Motor rotation angle sensor 1 input
    z46-9 - -
    z46-10 - -
    z46-11 - -
    z46-12 - -
    z46-13 - -