AMPLIFIER ANTENNA REMOVAL

PROCEDURE

  1. PRECAUTION

    Note:

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click hereClick here).

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click hereClick here).

  3. REMOVE ROOF HEADLINING ASSEMBLY

    Click here

  4. REMOVE NO. 1AMPLIFIER ANTENNA ASSEMBLY

    1. E332824

      Disconnect the connector.

    2. E332825

      Remove the bolt and then remove the washer and holder.

    3. E332826

      Remove the No. 1 amplifier antenna assembly of the vehicle outside.

  5. REMOVE ANTENNA COVER KIT

    1. E332827N01

      Detach the claws and guides and remove the No. 1 amplifier antenna assembly as indicated by the arrows in the order shown in the illustration.

    2. When reusing the No. 1 amplifier antenna assembly:

      1. E332828

        Remove the seal.