FRONT POWER SEAT CONTROL SYSTEM CUSTOMIZE PARAMETERS

  1. CUSTOMIZE FRONT POWER SEAT CONTROL SYSTEM

    Tip:

    The following items can be customized.

    Note:

    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Record the current settings before customizing.

    1. Customizing with the intelligent tester

      1. Connect the intelligent tester to the DLC3.

      2. Turn the engine switch on (IG).

      3. Turn the intelligent tester on.

      4. Enter the following menus: Utility / Customize / Seat or Smart & Entry.

      5. Select the setting by referring to the table below.

        Entry & Start

        Tester Display

        Description

        Default

        Setting

        ECU

        Seat position/Tilt & Telesco memory recall setting

        This customize function switches the condition of the seat position, mirror position and tilt and telescopic memory recall. Possible recall activation parameters are "driver door unlocked with smart entry and start system and opened" or "any door unlocked with smart entry and start system and opened".

        D Door

        0:D Door,1:Any Door

        Main body ECU

        Seat

        Tester Display

        Description

        Default

        Setting

        ECU

        Seat Move Distance

        Allows customization of the seat movement distance for the power easy access system.

        Standard

        00:OFF,01:Little,10:Standard

        Front power seat switch LH (seat ECU)

    2. Customizing with Multi-information Display

      1. Turn the engine switch on (IG).

      2. With the vehicle stationary or at a vehicle speed of less than 8 km/h (4.9 mph), press and hold the menu switch on the steering pad switch to display the meter customize mode screen.

      3. Select the setting by referring to the table below.

        Tester Display

        Default

        Content

        Setting

        Relevant ECU

        DRIVER SEAT EASY-EXIT

        FULL

        Allows customization of the seat movement distance for the power easy access system.

        OFF, PARTIAL or FULL

        Front power seat switch LH (seat ECU)

    3. Customizing with Multi-display

      1. Turn the engine switch on (IG).

      2. Select the following menus: Setup / Vehicle / Vehicle Customization.

      3. Select the setting by referring to the table below.

        Tester Display

        Default

        Content

        Setting

        Relevant ECU

        Driver's Seat Easy Exit

        Full

        Allows customization of the seat movement distance for the power easy access system.

        OFF, Partial or Full

        Front power seat switch LH (seat ECU)