DRIVE BELT ON-VEHICLE INSPECTION

PROCEDURE

  1. INSPECT V-RIBBED BELT

    1. B324013

      Check the V-ribbed belt for wear, cracks or other signs of damage.

      If any of the following defects is found, replace the V-ribbed belt.

      • The belt is cracked.

      • The belt is worn out to the extent that the cords are exposed.

      • The belt has chunks missing from the ribs.

    2. B075171C02

      *a

      Correct

      *b

      Incorrect

      Check that the V-ribbed belt fits properly in the ribbed grooves.

      Tip:

      Check with your hand to confirm that the V-ribbed belt has not slipped out of the groove on the bottom of the pulley. If it has slipped out, replace the V-ribbed belt. Install a new V-ribbed belt correctly.