WIPER SWITCH INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY

   1. Attach the claw to install the windshield wiper switch assembly.

   2. Connect the connector.

2. INSTALL UPPER STEERING COLUMN COVER

   1. Attach the 4 clips and claw to install the upper steering column upper cover to the instrument cluster finish panel.

3. INSTALL LOWER STEERING COLUMN COVER

   1. Attach the 2 claws to install the lower steering cover.

   2. Install the screw.

   3. Turn the steering wheel to the right and left as necessary to install the 2 screws.

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).