PERSONAL LIGHT REMOVAL

PROCEDURE

  1. REMOVE MAP LIGHT ASSEMBLY

    1. E268897

      Using a moulding remover, disengage the 4 clips and 4 claws.

    2. Disconnect each connector to remove the map light assembly.

  2. REMOVE MAP LIGHT BULB

    1. E268893

      Turn the 2 map light sockets with the 2 map light bulbs in the direction indicated by the arrows in the illustration to remove them.

    2. Remove the 2 map light bulbs from the 2 map light sockets.

  3. REMOVE MAP LIGHT LOCK ASSEMBLY

    1. E365048C01

      *a

      Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, disengage the 2 claws to remove the map light lock assembly as shown in the illustration.