REAR LIGHT ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE

  1. REMOVE CENTER BACK DOOR GARNISH

    Click here

  2. REMOVE BACK DOOR SIDE GARNISH LH

    Click here

  3. REMOVE BACK DOOR SIDE GARNISH RH

    Click here

  4. REMOVE BACK DOOR TRIM BOARD ASSEMBLY

    Click here

  5. REMOVE POWER BACK DOOR SENSOR ASSEMBLY LH (w/ Power Back Door)

    Click here

  6. REMOVE REAR LIGHT ASSEMBLY LH

    1. Put protective tape around the rear light assembly LH.

    2. Disconnect the 2 connectors.

    3. Remove the 3 nuts and 2 cap nuts to remove the rear light assembly LH.

      E269015C01

      *1

      Protective Tape

      *2

      Connector

      *3

      Nut

      *4

      Cap Nut