REAR SEAT ASSEMBLY(for Smart Cab) REASSEMBLY

PROCEDURE


  1. INSTALL SEAT COVER WIRE

    Tech Tips

    Use the same procedure for the opposite side.


    1. A01L9NZN01

      Install the seat cover wire.

      Tech Tips


      • Wire 1000 mm (3.28 ft.) or longer and shaped wire are available as supplied parts.

      • For wire 1000 mm (3.28 ft.) or less in length, cut or shape 1000 mm (3.28 ft.) wire into the dimensions shown in the illustration.

      • Make sure to read the precautions before preparing the wire.

        Click here

      Dimensions
      A 480 mm (1.57 ft.)

      Tech Tips

      The dimensions shown in the illustration are the lengths.

      A01SGX6

  2. INSTALL BENCH TYPE REAR SEAT CUSHION COVER

    Tech Tips


    • Use the same procedure for the opposite side.

    • When installing the seat cover, refer to the precautions in order to prevent wrinkles from forming.

      Click here

    • Align the seam allowance in a single direction as shown in the illustration.

      A01LG68N01

    1. Using hog ring pliers, install the bench type rear seat cushion cover the rear seat cushion pad with 17 new hog rings in the order indicated in the illustration.

      A01LDN1C01
      *1 Hog Ring Pliers - -

      Note


      • Be careful not to damage the bench type rear seat cushion cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the bench type rear seat cushion cover.