STARTING SYSTEM


  1. OUTLINE


    1. A tandem solenoid type starter assembly is used. This starter uses a structure in which the flow of current to the pinion gear push out and motor are independent. Due to this, it is possible to restart the engine when the engine has been stopped but is still moving due to inertia, thereby reducing the amount of time to restart the engine during idling stop control.

      A01GH00C01
      *1 Tandem Solenoid *2 Solenoid to Push Out Pinion Gear
      *3 Motor Current Solenoid - -
      *a Tandem Solenoid Cross Section - -

  2. SPECIFICATION

    Starter Type Tandem Solenoid
    Rating Output 1.7 kW
    Rating Voltage 12 V
    Length*1 162.6 mm (6.4 in.)
    Weight 4000 g (8.8 lb)
    Rotational Direction*2 Clockwise

    • *1: Length from the mounted area to the rear end of the starter

    • *2: Viewed from pinion side