UNDER BODY THREE-DIMENSIONAL DISTANCE

Tip:

  • Point H, h on the vehicle are asymmetrical.

  • In cases in which only one dimension is given, left and right are symmetrical.

  • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

Table 1. Measuring Point Name

Symbol

Name

Hole Diameter

mm (in.)

A, a

Front Bumper Reinforcement Installation Nut

M10 (0.39)

B, b

Front Crossmember Installation Nut

M6 (0.24)

C, c

Front Side Member Standard Hole

φ18 (0.71)

D, d

Front Suspension Crossmember Installation Nut

M12 (0.47)

E, e

Front Suspension Crossmember Installation Nut

M12 (0.47)

F, f

Front Frame Installation Nut

M10 (0.39)

G, g

Torque Front Box Standard Hole

φ25 (0.98)

H, h

Front Side Member Brace Standard Hole

φ10 (0.39)

J, j

Front Side Inner Rear Member Standard Hole

φ18 (0.71)

K, k

Front Floor Under Reinforcement Standard Hole

φ10 (0.39)

L, l

Rear Floor Side Member Standard Hole

φ18 (0.71)

M, m

Trailing Arm Installation Hole

φ14 (0.55)

N, n

Rear Floor Side Member Standard Hole

φ18 (0.71)

O, o

Rear Floor Side Member Standard Hole

φ13 (0.52)

P, p

Rear Floor Side Member Standard Hole

φ18 (0.71)
K115819C02

*A

FRONT

*B

LH

*C

RH

-

-

*a

Distance between points other than those to the left

*b

mm

(in.)