FUEL SYSTEM


  1. CONSTRUCTION


    1. A multiplex layered plastic fuel tank assembly is used. This fuel tank assembly consists of 6 layers of 4 types of material.

    2. A fuel drain mark has been provided at the lowest position of the fuel tank assembly. When dismantling (scrapping) the vehicle, drain fuel by drilling a hole at the drain mark.

      A01R7Z0C04
      *a Exterior of Fuel Tank Assembly *b Interior of Fuel Tank Assembly
      *c High Density Polyethylene (HDPE) *d Regrind Material
      *e Adhesive *f Ethylene Vinyl Alcohol Copolymer (EVOH)
      *g Fuel Drain Mark *h View from Bottom Side