HYBRID TRANSAXLE OIL SEAL REPLACEMENT

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE FRONT WHEELS

  2. REMOVE NO. 1 ENGINE UNDER COVER

  3. REMOVE REAR ENGINE UNDER COVER LH

  4. REMOVE REAR ENGINE UNDER COVER RH

  5. DRAIN HYBRID TRANSAXLE FLUID

    Click here

  6. REMOVE FRONT AXLE SHAFT NUT LH

    Click here

  7. REMOVE FRONT AXLE SHAFT NUT RH

    Tech Tips

    Perform the same procedure as for the LH side.

  8. SEPARATE FRONT SPEED SENSOR LH

    Click here

  9. SEPARATE FRONT SPEED SENSOR RH

    Tech Tips

    Perform the same procedure as for the LH side.

  10. SEPARATE FRONT FLEXIBLE HOSE LH

    Click here

  11. SEPARATE FRONT FLEXIBLE HOSE RH

    Tech Tips

    Perform the same procedure as for the LH side.

  12. SEPARATE TIE ROD END SUB-ASSEMBLY LH

    Click here

  13. SEPARATE TIE ROD END SUB-ASSEMBLY RH

    Tech Tips

    Perform the same procedure as for the LH side.

  14. SEPARATE FRONT STABILIZER LINK ASSEMBLY LH

    Click here

  15. SEPARATE FRONT STABILIZER LINK ASSEMBLY RH

    Tech Tips

    Perform the same procedure as for the LH side.

  16. SEPARATE FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY LH

    Click here

  17. SEPARATE FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY RH

    Tech Tips

    Perform the same procedure as for the LH side.

  18. SEPARATE FRONT DRIVE SHAFT ASSEMBLY LH

    Click here

  19. SEPARATE FRONT DRIVE SHAFT ASSEMBLY RH

    Tech Tips

    Perform the same procedure as for the LH side.

  20. REMOVE FRONT DRIVE SHAFT ASSEMBLY LH

    Click here

  21. REMOVE FRONT DRIVE SHAFT ASSEMBLY RH

    Tech Tips

    Perform the same procedure as for the LH side.

  22. REMOVE FRONT DRIVE SHAFT HOLE SNAP RING LH

    Click here

  23. REMOVE FRONT DRIVE SHAFT HOLE SNAP RING RH

    Tech Tips

    Perform the same procedure as for the LH side.

  24. REMOVE HYBRID VEHICLE TRANSAXLE ASSEMBLY TYPE T OIL SEAL


    1. B005Z9TE04
      Text in Illustration
      *a LH Side
      *b RH Side

      Using SST, remove the 2 hybrid vehicle transaxle assembly type T oil seals.

      SST
      09308-00010

  25. INSTALL HYBRID VEHICLE TRANSAXLE ASSEMBLY TYPE T OIL SEAL


    1. Install a new LH side hybrid vehicle transaxle assembly type T oil seal.


      1. B005ZFCE01

        Using SST and a hammer, tap in a new hybrid vehicle transaxle assembly type T oil seal.

        SST
        09316-10010
        09950-70010   ( 09951-07150 )
        Oil seal installation depth
        -0.5 to 0.5 mm (-0.0197 to 0.0197 in.)

      2. Coat the lip of the hybrid vehicle transaxle assembly type T oil seal with MP grease.

    2. Install a new RH side hybrid vehicle transaxle assembly type T oil seal.


      1. B005Y72E01

        Using SST and a hammer, tap in a new hybrid vehicle transaxle assembly type T oil seal.

        SST
        09726-36010
        09950-70010   ( 09951-07150 )
        Oil seal installation depth
        -0.5 to 0.5 mm (-0.0197 to 0.0197 in.)

      2. Coat the lip of the hybrid vehicle transaxle assembly type T oil seal with MP grease.

  26. INSTALL FRONT DRIVE SHAFT HOLE SNAP RING LH

    Click here

  27. INSTALL FRONT DRIVE SHAFT HOLE SNAP RING RH

    Tech Tips

    Perform the same procedure as for the LH side.

  28. INSTALL FRONT DRIVE SHAFT ASSEMBLY LH

    Click here

  29. INSTALL FRONT DRIVE SHAFT ASSEMBLY RH

    Tech Tips

    Perform the same procedure as for the LH side.

  30. CONNECT FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY LH

    Click here

  31. CONNECT FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY RH

    Tech Tips

    Perform the same procedure as for the LH side.

  32. INSTALL FRONT STABILIZER LINK ASSEMBLY LH

    Click here

  33. INSTALL FRONT STABILIZER LINK ASSEMBLY RH

    Tech Tips

    Perform the same procedure as for the LH side.

  34. CONNECT TIE ROD END SUB-ASSEMBLY LH

    Click here

  35. CONNECT TIE ROD END SUB-ASSEMBLY RH

    Tech Tips

    Perform the same procedure as for the LH side.

  36. INSTALL FRONT FLEXIBLE HOSE LH

    Click here

  37. INSTALL FRONT FLEXIBLE HOSE RH

    Tech Tips

    Perform the same procedure as for the LH side.

  38. INSTALL FRONT SPEED SENSOR LH

    Click here

  39. INSTALL FRONT SPEED SENSOR RH

    Tech Tips

    Perform the same procedure as for the LH side.

  40. INSTALL FRONT AXLE SHAFT NUT LH

    Click here

  41. INSTALL FRONT AXLE SHAFT NUT RH

    Tech Tips

    Perform the same procedure as for the LH side.

  42. ADD HYBRID TRANSAXLE FLUID

    Click here

  43. INSPECT HYBRID TRANSAXLE FLUID

    Click here

  44. INSPECT FOR TRANSAXLE FLUID LEAK

  45. INSTALL FRONT WHEELS

    Click here

  46. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT

    Click here

  47. INSTALL REAR ENGINE UNDER COVER LH

  48. INSTALL REAR ENGINE UNDER COVER RH

  49. INSTALL NO. 1 ENGINE UNDER COVER

  50. INSPECT SPEED SENSOR SIGNAL

    Click here