GLOW PLUG CONTROLLER INSTALLATION

PROCEDURE

1. INSTALL GLOW PLUG CONTROLLER BRACKET

   1. Install the 2 glow plug controller brackets with the 4 screws to the glow plug controller.

      3.0 N*m

      31 kgf*cm

      27 in.*lbf

2. INSTALL GLOW PLUG CONTROLLER ASSEMBLY

   1. Install the glow plug controller assembly with the 2 bolts.

      8.0 N*m

      82 kgf*cm

      71 in.*lbf

   2. Connect the 4 glow plug controller connectors.

3. INSTALL FRONT FENDER LINER LH

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click hereClick hereClick hereClick here