REAR BUMPER(for Wagon) REMOVAL

PROCEDURE

  1. REMOVE REAR QUARTER PANEL MUDGUARD LH (w/ Mudguard)

    Click here

  2. REMOVE REAR QUARTER PANEL MUDGUARD RH (w/ Mudguard)

    Tip:

    Use the same procedure as for the LH side.

  3. REMOVE REAR BUMPER ASSEMBLY

    1. B411056C01
      V100155

      Protective Tape

      Apply protective tape around the rear bumper assembly as shown in the illustration.

    2. B411057

      Remove the 2 screws.

    3. B411058

      Remove the 2 screws and 2 clips.

    4. B411059

      Using a clip remover, remove the 7 clips.

    5. B411060

      Using a clip remover, remove the clip.

      Tip:

      Use the same procedure for the RH side and LH side.

    6. B411061

      Disengage the 7 claws as shown in the illustration.

      Tip:

      Use the same procedure for the RH side and LH side.

    7. B411063

      Disengage the 4 claws as shown in the illustration.

    8. w/ TOYOTA Parking Assist-sensor System:

      1. Disconnect the connector.

    9. Remove the rear bumper assembly.