DOOR CONTROL TRANSMITTER(w/o Entry and Start System) REMOVAL

PROCEDURE

1. REMOVE TRANSMITTER HOUSING COVER

   1. 

      Insert a precision screwdriver into the gap within area A, and push the screwdriver downwards to open the cover. Then, insert the screwdriver into the gap within area B, push the screwdriver downwards and remove the transmitter housing cover.

      Tip:

      Tape the screwdriver tip before use.

      Table 1. Text in Illustration

      *1	Protective Tape

2. REMOVE TRANSMITTER BATTERY

   1. 

      Insert a precision screwdriver into the gap and gently remove the transmitter battery (lithium battery: CR2016).

      Note:

      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.

      • Do not push the terminals with your finger.

      • Do not forcibly pry up the transmitter battery. The terminals may be damaged.

      • Do not touch the transmitter battery with wet hands. Water may cause rust.

      • Do not touch or move any components inside the transmitter. It may interfere with proper operation.

      Tip:

      Tape the screwdriver tip before use.

      Table 2. Text in Illustration

      *1	Protective Tape