REAR SEAT ASSEMBLY(for Smart Cab) INSTALLATION

PROCEDURE


  1. INSTALL REAR SEAT CUSHION LOCK HOOK

    Note


    • Perform the following only when replacing the rear seat cushion lock hook.

    • Do not reuse the rear seat cushion lock hook after removing it.

    Tech Tips

    Use the same procedure for the opposite side.


    1. B00254A

      Attach the claw to install a new rear seat cushion lock hook.

  2. INSTALL REAR SEAT HEADREST ASSEMBLY

    Tech Tips

    Use the same procedure for the opposite side.


    1. B00294PC01
      B0069FO Install in this Direction

      Attach the hook.

    2. B0026AYN01

      Temporarily install the 3 bolts.

    3. Tighten the bolts in the order shown in the illustration to install rear seat headrest assembly.

      Torque:
      19.5 N*m  { 199 kgf*cm, 14 ft.*lbf }

  3. INSTALL BACK PANEL TRIM

    Click here

  4. INSTALL REAR SEAT CUSHION ASSEMBLY

    Tech Tips

    Use the same procedure for the opposite side.


    1. B0024OCC01
      B0069FO Install in this Direction

      Push as shown in the illustration to attach the guide to install the rear seat cushion assembly.

    2. B0025ICC01
      B0069FO Install in this Direction

      Push as shown in the illustration to attach the hook to install the rear seat cushion assembly.