ROOF HEADLINING REASSEMBLY

PROCEDURE

1. INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY

   Click here

2. INSTALL NO. 1 ROOF WIRE (w/ Illumination)

   
   

   1. Engage the 2 guides and position the No. 1 roof wire as shown in the illumination.

      

      Note

      Make sure that the No. 1 roof wire is not twisted and that the marking line (white) faces up.

      Text in Illustration

      *a	Align the center of the white tape on the wire with the edge of the trim, and fix the wire in place.	*b	Align the edge of the white tape on the wire with the sun visor mounting.
      *c	Align the white tape on the wire with the clip, and fix the wire in place.	-	-
      	Tape	-	-

   2. Apply tape as shown in the illustration.

3. INSTALL NO. 1 ROOF WIRE (w/o Illumination)

   
   

   1. Engage the 2 guides and position the No. 1 roof wire as shown in the illumination.

      

      Note

      Make sure that the No. 1 roof wire is not twisted and that the marking line (white) faces up.

      Text in Illustration

      *a	Align the center of the white tape on the wire with the edge of the trim, and fix the wire in place.	*b	Align the edge of the white tape on the wire with the sun visor mounting.
      *c	Align the white tape on the wire with the clip, and fix the wire in place.	-	-
      	Tape	-	-

   2. Apply tape as shown in the illustration.