MANUAL TRANSAXLE OIL ON-VEHICLE INSPECTION

PROCEDURE

  1. INSPECT TRANSAXLE OIL

    1. Stop the vehicle on a level surface.

    2. Remove the No. 1 engine under cover.

      Click hereClick hereClick here

    3. C277970C01

      *1

      Manual Transaxle Filler Plug

      Remove the manual transaxle filler plug and gasket.

    4. C278961C01

      *a

      0 to 5 mm (0 to 0.197 in.)

      Check that the oil level is within 0 to 5 mm (0 to 0.197 in.) from the bottom of the manual transaxle filler plug opening.

      Note:

      An excessively large or small amount of oil may cause problems.

    5. Check for oil leakage when the oil level is low.

    6. Install a new gasket and the manual transaxle filler plug.

      39.2 N*m

      400 kgf*cm

      29 ft.*lbf

    7. Install the No. 1 engine under cover.

      Click hereClick here