FRONT POWER SEAT CONTROL SYSTEM(w/ Memory)

CAUTION / NOTICE / HINT

PROCEDURE

1. VEHICLE BROUGHT TO WORKSHOP

   Result

   Proceed to
   NEXT

   NEXT

2. CUSTOMER PROBLEM ANALYSIS

   1. Interview the customer to confirm the trouble.

      Click here

   Result

   Proceed to
   NEXT

   NEXT

3. INSPECT BATTERY VOLTAGE

   1. Measure the battery voltage.

      Standard voltage

      11 to 14 V

      If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.

   Result

   Proceed to
   NEXT

   NEXT

4. CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*

   1. Use the GTS to check if the CAN communication system is functioning normally.

      Click here

      • for LHD with Central Gateway ECU:Click here

      • for LHD without Central Gateway ECU:Click here

      • for RHD with Central Gateway ECU:Click here

      • for RHD without Central Gateway ECU:Click here

   Result

   Result Result	Proceed to
   CAN DTC is not output	A
   CAN DTC is output	B

   B

   GO TO CAN COMMUNICATION SYSTEM

   • for LHD with Central Gateway ECU:Click here

   • for LHD without Central Gateway ECU:Click here

   • for RHD with Central Gateway ECU:Click here

   • for RHD without Central Gateway ECU:Click here

   A

5. PROBLEM SYMPTOMS TABLE

   1. Refer to Problem Symptoms Table.

      Click here

   Result

   Result Result	Proceed to
   Fault is not listed in problem symptoms table	A
   Fault is listed in problem symptoms table	B

   B

   REPAIR OR REPLACEClick here

   A

6. OVERALL ANALYSIS AND TROUBLESHOOTING*

   1. Operation Check

      Click here

   2. Data List / Active Test

      Click here

   3. Terminals of ECU

      Click here

   Result

   Proceed to
   NEXT

   NEXT

7. REPAIR OR REPLACE

   Result

   Proceed to
   NEXT

   NEXT

8. CONFIRMATION TEST

   Result

   Proceed to
   NEXT

   NEXT

   END