DOOR CONTROL RECEIVER(for Wagon) INSTALLATION

PROCEDURE

1. INSTALL DOOR CONTROL RECEIVER

   1. Engage the 2 guides.

   2. Install the door control receiver with the bolt.

      7.5 N*m

      76 kgf*cm

      66 in.*lbf

   3. Connect the connector.

2. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

   Click hereClick here

3. INSTALL RECLINING REMOTE CONTROL BEZEL LH

   Click hereClick here

4. INSTALL NO. 2 DECK SIDE TRIM HOOK

   Click hereClick here

5. INSTALL REAR SEAT SIDE GARNISH LH

   Click hereClick here

6. INSTALL REAR SEATBACK HINGE SUB-ASSEMBLY LH

   Click hereClick here

7. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

   Click hereClick here

8. INSTALL REAR DOOR SCUFF PLATE LH

   Click hereClick here

9. INSTALL REAR SEATBACK ASSEMBLY LH

   Click here

10. CONNECT REAR NO. 1 SEAT LOCK CABLE ASSEMBLY

    Click here

11. INSTALL REAR SEAT HEADREST ASSEMBLY

12. INSTALL REAR SEAT CUSHION ASSEMBLY

    Click here

13. INSTALL REAR DECK TRIM COVER

    Click hereClick here

14. INSTALL ROOM PARTITION NET ASSEMBLY (w/ Partition Net)

    Click hereClick here

15. INSTALL TONNEAU COVER ASSEMBLY

    Click hereClick here

16. INSTALL DECK FLOOR BOX LH

    w/o Woofer:

    Click hereClick here

17. INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY (w/ Deck Board)

    Click hereClick here

18. INSTALL REAR FLOOR MAT ASSEMBLY

    Click hereClick here

19. INSTALL FRONT DECK FLOOR BOX (w/ Deck Board)

    Click hereClick here

20. INSTALL DECK BOARD ASSEMBLY (w/ Deck Board)

    Click hereClick here

21. INSTALL DECK BOARD SUB-ASSEMBLY (w/ Deck Board)

    Click hereClick here