HAZARD WARNING SWITCH INSTALLATION

PROCEDURE

1. INSTALL HAZARD WARNING SIGNAL SWITCH ASSEMBLY

   
   

   1. Engage the 4 claws to install the hazard warning signal switch assembly.

2. INSTALL INTEGRATION CONTROL AND PANEL

   Click here

3. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

4. INSTALL DECK FLOOR BOX RH

   Click here

5. INSTALL REAR DECK FLOOR BOX

   Click here

6. INSTALL NO. 1 DECK BOARD

   Click here

7. INSTALL NO. 2 DECK BOARD

   Click here

8. INSTALL DECK BOARD ASSEMBLY

   Click here