ROOM TEMPERATURE SENSOR(for Rear) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE NO. 2 COOLER THERMISTOR


    1. B005SE4C01
      B006DHE Remove in this Direction

      Detach the claw and guide in the direction indicated by the arrow shown in the illustration and remove the cover.

    2. B005W0V

      Detach the claw and guide and disconnect the cooler thermistor (No. 2 room temperature) from the rear door trim.

    3. B005WZF

      Disconnect the connector and remove the cooler thermistor (No. 2 room temperature).