DECK THREE-DIMENSIONAL DISTANCE


  1. for Double Cab


    1. for A Deck

      Tech Tips


      • In cases in which only one dimension is given, left and right are symmetrical.

      • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

      Measuring Point Name
      Symbol Name

      Hole Diameter

      mm (in.)
      A, a Header Board Upper Rail Standard Hole φ10 (0.39)
      B, b Side Panel Rear End Post Inside Plate Standard Hole φ10 (0.39)
      C, c Rear Body Side Panel Standard Hole φ10 (0.39)
      D, d Tail Gate Hinge Installation Nut M10 (0.39)
      E, e Floor Side Panel Installation Nut M8 (0.31)
      F, f Rear Body Panel Inside Surface -
      G, g Rear Body Side Inner Panel / Floor Side Panel Adjoining Portion -
      H, h Rear Body Panel Inside Surface -
      J, j Rear Body Side Inner Panel / Floor Side Panel Adjoining Portion -
      A01KXRSC01
      *a Distance between points other than those above *b

      mm

      (in.)

    2. for J Deck

      Tech Tips


      • In cases in which only one dimension is given, left and right are symmetrical.

      • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

      Measuring Point Name
      Symbol Name

      Hole Diameter

      mm (in.)
      A, a Header Board Upper Rail Standard Hole φ10 (0.39)
      B, b Side Panel Rear End Post Inside Plate Standard Hole φ10 (0.39)
      C, c Rear Body Side Panel Standard Hole φ10 (0.39)
      D, d Tail Gate Hinge Installation Nut M10 (0.39)
      E, e Floor Side Panel Installation Nut M8 (0.31)
      F, f Side Panel Top Rail Corner -
      G, g Rear Body Side Inner Panel / Floor Side Panel Adjoining Portion -
      H, h Rear Body Panel Inside Surface -
      J, j Rear Body Side Inner Panel / Floor Side Panel Adjoining Portion -
      A01KXSXC01
      *a Distance between points other than those above *b

      mm

      (in.)

  2. for Single Cab


    1. for Short Body

      Tech Tips


      • In cases in which only one dimension is given, left and right are symmetrical.

      • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

      Measuring Point Name
      Symbol Name

      Hole Diameter

      mm (in.)
      A, a Header Board Upper Rail Standard Hole φ10 (0.39)
      B, b Side Panel Rear End Post Inside Plate Standard Hole φ10 (0.39)
      C, c Rear Body Side Panel Standard Hole φ10 (0.39)
      D, d Tail Gate Hinge Installation Nut M10 (0.39)
      E, e Floor Side Panel Installation Nut M8 (0.31)
      F, f Side Panel Top Rail Corner -
      G, g Rear Body Side Inner Panel / Floor Side Panel Adjoining Portion -
      H, h Rear Body Panel Inside Surface -
      J, j Rear Body Side Inner Panel / Floor Side Panel Adjoining Portion -
      A01KXRBC01
      *a Distance between points other than those above *b

      mm

      (in.)

    2. for Long Body

      Tech Tips


      • In cases in which only one dimension is given, left and right are symmetrical.

      • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

      Measuring Point Name
      Symbol Name

      Hole Diameter

      mm (in.)
      A, a Header Board Upper Rail Standard Hole φ10 (0.39)
      B, b Side Panel Rear End Post Inside Plate Standard Hole φ10 (0.39)
      C, c Rear Body Side Panel Standard Hole φ10 (0.39)
      D, d Tail Gate Hinge Installation Nut M10 (0.39)
      E, e Floor Side Panel Installation Nut M8 (0.31)
      F, f Side Panel Top Rail Corner -
      G, g Rear Body Side Inner Panel / Floor Side Panel Adjoining Portion -
      H, h Rear Body Panel Inside Surface -
      J, j Rear Body Side Inner Panel / Floor Side Panel Adjoining Portion -
      A01KY4GC01
      *a Distance between points other than those above *b

      mm

      (in.)

  3. for Smart Cab

    Tech Tips


    • In cases in which only one dimension is given, left and right are symmetrical.

    • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

    Measuring Point Name
    Symbol Name

    Hole Diameter

    mm (in.)
    A, a Header Board Upper Rail Standard Hole φ10 (0.39)
    B, b Side Panel Rear End Post Inside Plate Standard Hole φ10 (0.39)
    C, c Rear Body Side Panel Standard Hole φ10 (0.39)
    D, d Tail Gate Hinge Installation Nut M10 (0.39)
    E, e Floor Side Panel Installation Nut M8 (0.31)
    F, f Rear Body Panel Inside Surface -
    G, g Rear Body Side Inner Panel / Floor Side Panel Adjoining Portion -
    H, h Rear Body Panel Inside Surface -
    J, j Rear Body Side Inner Panel / Floor Side Panel Adjoining Portion -
    A01KY01C01
    *a Distance between points other than those above *b

    mm

    (in.)