FRONT TURN SIGNAL LIGHT ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. REMOVE FRONT BUMPER ASSEMBLY

    Click here

  2. REMOVE FRONT TURN SIGNAL LIGHT ASSEMBLY


    1. Disconnect the connector.

    2. A005EI6

      Disengage each clamp.

    3. Remove the 2 screws and front turn signal light assembly.

  3. REMOVE FRONT TURN SIGNAL LIGHT BULB


    1. A005EYV

      Turn the front turn signal light plug assembly with the front turn signal light bulb in the direction indicated by the arrow shown in the illustration, and remove them as a unit.

    2. Remove the front turn signal light bulb from the socket.

  4. REMOVE FRONT TURN SIGNAL LIGHT BRACKET


    1. A005A3Q

      Remove the 2 screws.

    2. Disengage the 2 guides and remove the front turn signal light bracket.