CONDENSER(for 3ZR-FE, 3ZR-FAE, 2AR-FE) REMOVAL

PROCEDURE

1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

   Click here

2. REMOVE HEADLIGHT

   for Halogen Headlight:Click here

   for LED Headlight:Click here

3. REMOVE FRONT BUMPER UPPER REINFORCEMENT SUB-ASSEMBLY

   Click here

4. REMOVE RADIATOR UPPER AIR GUIDE PLATE

   Click here

5. DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY

   1. 

      Remove the bolt and disconnect the discharge hose sub-assembly from the cooler condenser assembly.

   2. Remove the O-ring from the discharge hose sub-assembly.

      Note:

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

6. DISCONNECT LIQUID PIPE SUB-ASSEMBLY

   1. 

      Remove the bolt and disconnect the liquid pipe sub-assembly from the cooler condenser assembly.

   2. Remove the O-ring from the liquid pipe sub-assembly.

      Note:

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

7. REMOVE NO. 1 RADIATOR SUPPORT

   Click here

8. REMOVE NO. 2 FAN SHROUD

   1. Detach the 3 clamps and disconnect the water by-pass pipe from the No. 2 fan shroud.

   2. 

      Remove the 2 bolts and No. 2 fan shroud.

9. REMOVE COOLER CONDENSER ASSEMBLY

   1. 

      Detach the 2 guides and remove the cooler condenser assembly as shown in the illustration.

      Note:

      Do not damage the cooler condenser or radiator when removing the cooler condenser assembly.