FRONT LOWER BALL JOINT ON-VEHICLE INSPECTION

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.

PROCEDURE

  1. INSPECT FRONT LOWER BALL JOINT ASSEMBLY

    1. C135509

      Check for looseness.

      1. Lift up the vehicle.

      2. Move the front lower No. 1 suspension arm sub-assembly up and down by hand (294 N (30 kgf) or more) to check that there is no looseness at the front lower ball joint assembly.