ENGINE SWITCH INSTALLATION

PROCEDURE

1. INSTALL ENGINE SWITCH (for LHD)

   1. Engage the 2 claws to install the engine switch.

2. INSTALL NO. 1 SWITCH HOLE BASE (for LHD)

   Click here

3. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for LHD)

   Click here

4. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (for LHD)

   Click here

5. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL (for LHD)

   Click here

6. INSTALL NO. 1 METER HOOD CLUSTER (for LHD)

   Click here

7. INSTALL ENGINE SWITCH (for RHD)

   1. Engage the 2 claws to install the engine switch.

8. INSTALL NO. 2 SWITCH HOLE BASE (for RHD)

   Click here

9. INSTALL LOWER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for RHD)

   Click here

10. INSTALL UPPER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (for RHD)

    Click here

11. INSTALL INSTRUMENT SIDE PANEL RH (for RHD)

    Click here

12. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for RHD)

    Click here

13. INSTALL NO. 1 METER HOOD CLUSTER (for RHD)

    Click here

14. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click hereClick hereClick here