PRE-CRASH SAFETY SYSTEM WARNING BUZZER INSTALLATION

PROCEDURE

1. INSTALL PRE-CRASH SAFETY CITY BUZZER

   Note:

   If the pre-crash safety city buzzer has been struck or dropped, replace it with a new one.

   1. 

      Engage the clamp to install the pre-crash safety city buzzer.

   2. Connect the connector.

      Tip:

      Make sure the connector and terminals are not deformed or corroded.

2. INSTALL LOWER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for LHD)

   for Hatchback, Wagon:Click here

   for Sedan:Click here

3. INSTALL LOWER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for RHD)

   for Hatchback, Wagon:Click here

   for Sedan:Click here