PARKING BRAKE PEDAL(for LHD) INSTALLATION

PROCEDURE


  1. INSTALL PARKING BRAKE CONTROL PEDAL ASSEMBLY


    1. A005F17

      Install the parking brake control pedal assembly with the bolt and 2 nuts.

      Torque:
      15 N*m  { 148 kgf*cm, 11 ft.*lbf }
    2. A0059S1

      Connect the parking brake switch connector.

    3. Engage the wire harness clamp.

    4. A005AL1

      Install the No. 1 parking brake cable assembly with the 4 bolts and nut.

      Torque:
      15 N*m  { 148 kgf*cm, 11 ft.*lbf }

    5. Install the No. 1 parking brake cable assembly to the clamp.

    6. Engage the 2 wire harness clamps.

    7. A005DNZE03
      Text in Illustration
      *1 Lock Nut
      *2 Adjusting Nut

      Temporarily install the lock nut.

      Tech Tips

      After adjusting parking brake pedal travel, tighten the lock nut.

  2. CONNECT NO. 1 PARKING BRAKE PULL ROD SUB-ASSEMBLY


    1. A0059XLE02
      Text in Illustration
      *a Turn
      *b Hold

      Connect the No. 1 parking brake pull rod sub-assembly to the parking brake control pedal assembly as shown in the illustration.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

  3. INSTALL AIR CONDITIONING UNIT ASSEMBLY

    Click here

  4. INSTALL HV BATTERY

    Click here

  5. ADJUST PARKING BRAKE PEDAL TRAVEL

    Click here

  6. INSPECT BRAKE WARNING LIGHT

    Click here