STEERING COLUMN SYSTEM


  1. CONSTRUCTION


    1. The steering column assembly consists of the steering main shaft, telescopic motor, tilt motor and multiplex tilt and telescopic ECU.

    2. Position sensors, built into the tilt motor and telescopic motor, make accurate detection of the position of the steering column possible.

      B0022V2C01
      *1 Steering Main Shaft *2

      Tilt Motor


      • Tilt Position Sensor
      *3

      Telescopic Motor


      • Telescopic Position Sensor

      		 *4 Multiplex Tilt and Telescopic ECU

  2. OPERATION


    1. The tilt adjustment range is 50 mm (1.97 in.) and the telescopic adjustment range is 60 mm (2.36 in.).

      B002393C01
      *a Tilt Adjustment Range *b Telescopic Adjustment Range
      *c Tilt *d Telescopic