BLOWER UNIT DISASSEMBLY

PROCEDURE


  1. REMOVE NO. 1 BLOWER DAMPER SERVO SUB-ASSEMBLY


    1. A005CGZ

      Remove the 2 screws and No. 1 blower damper servo sub-assembly.

  2. REMOVE AIR FILTER CASE


    1. A005AWT

      Disengage the claw.

    2. Disengage the guide and remove the air filter case as shown in the illustration.

  3. REMOVE AIR REFINER ELEMENT


    1. A0059RR

      Remove the air refiner element as shown in the illustration.

  4. REMOVE BLOWER MOTOR WITH FAN SUB-ASSEMBLY


    1. A005BDJ

      Remove the 3 screws and blower motor with fan sub-assembly.

      Note

      When removing the blower motor with fan sub-assembly, do not damage it or allow it to receive an impact.