КОРПУС ДРОССЕЛЬНОЙ ЗАСЛОНКИ ДИЗЕЛЬНОГО ДВИГАТЕЛЯ УСТАНОВКА


  1. INSTALL DIESEL THROTTLE BODY ASSEMBLY


    1. Connect the connector to install the emission control valve wire to the diesel throttle body assembly.

    2. Install a new gasket and the diesel throttle body assembly with the 2 bolts and 2 nuts.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

    3. Connect the connector and clamp.

  2. INSTALL GAS FILTER BRACKET


    1. Install the gas filter bracket to the diesel throttle body assembly with the bolt.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

  3. INSTALL GAS FILTER


    1. Install the gas filter to the gas filter bracket.

    2. Connect the 2 vacuum hoses to the turbo pressure sensor and intake manifold.

  4. INSTALL INTERCOOLER AIR TUBE


    1. Install the intercooler air tube to the diesel throttle body assembly and tighten the hose clamp.

      Torque:
      6.0 N*m  { 61 kgf*cm, 53 in.*lbf }

    2. Connect the connector to the intake air temperature sensor.

    3. Install the air tube support bracket with the 3 bolts.

      Torque:
      6.0 N*m  { 61 kgf*cm, 53 in.*lbf }

  5. INSTALL NO. 4 AIR HOSE


    1. Install the No. 4 air hose and tighten the 2 hose clamps.

      Torque:
      6.0 N*m  { 61 kgf*cm, 53 in.*lbf }

    2. Connect the oil return hose and slide the 2 clips to secure the hose.

  6. PERFORM INITIALIZATION

    Click here