HOOD ON-VEHICLE INSPECTION

PROCEDURE

  1. INSPECT HOOD SUB-ASSEMBLY

    1. Check that the clearance measurements of areas A to H are within the standard ranges.

      B338143E01
      Table 1. Standard Clearance

      Area

      Measurement

      Area

      Measurement

      A

      (Reference)

      4.6 to 9.6 mm (0.181 to 0.378 in.)

      B

      (Reference)

      5.3 to 10.3 mm (0.209 to 0.406 in.)

      C

      (Reference)

      5.4 to 10.4 mm (0.213 to 0.409 in.)

      D

      (Reference)

      4.7 to 9.7 mm (0.185 to 0.382 in.)

      E

      1.7 to 4.7 mm (0.0669 to 0.185 in.)

      F

      -1.5 to 1.5 mm (-0.0591 to 0.0591 in.)

      G

      1.7 to 4.7 mm (0.0669 to 0.185 in.)

      H

      -1.5 to 1.5 mm (-0.0591 to 0.0591 in.)