BACK DOOR OPENING SIDE REINFORCEMENT CUT AND JOIN REPLACEMENT SECTIONS

A01GHGI


  1. REMOVAL

    Symbol Meaning
    B002F5A Remove Weld Points
    B002F3W Remove Weld Points
    B002F3X Remove Weld Points
    A01GHHB

  2. INSTALLATION

    Symbol Meaning
    B002F5A Remove Weld Points
    B002F3W Remove Weld Points
    B002F3X Remove Weld Points
    B002F3I Plug Weld
    B002F3M Plug Weld
    B002F4M Plug Weld

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    3. If the entire supply part is not needed, remove the part of the supply part that is needed.

      A01GH9V
      A01GH7XC01
      *1 ROOF SIDE REINFORCEMENT SUB-ASSEMBLY INNER - -

    4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.