STOP LIGHT SWITCH INSPECTION


  1. INSPECT STOP LIGHT SWITCH ASSEMBLY

    A01E29EE69
    Text in Illustration
    *1 Shaft
    *a

    Component without harness connected

    Stop Light Switch Assembly)
    *b Not Pushed
    *c Pushed

    1. Measure the resistance of the switch.

      Standard
      Tester Connection Switch Condition Specified Condition
      1 - 2 Pin not pushed Below 1 Ω
      3 - 4 Pin not pushed 10 k Ω or higher
      1 - 2 Pin pushed 10 k Ω or higher
      3 - 4 Pin pushed Below 1 Ω