FRONT PILLAR UPPER COVER INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL UPPER FRONT PILLAR COVER SUB-ASSEMBLY

   Tip:

   When installing a new upper front pillar cover sub-assembly, heat the vehicle body and upper front pillar cover sub-assembly using a heat light.

   Table 1. Heating Temperature

   Item	Temperature
   Vehicle Body	40 to 60°C (104 to 140°F)
   Upper Front Pillar Cover Sub-assembly	20 to 30°C (68 to 86°F)

   Note:

   Do not heat the vehicle body or upper front pillar cover sub-assembly excessively.

   1. Clean the vehicle body surface.

      1. Using a heat light, heat the vehicle body surface.

      2. Remove any double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

   2. Install a new upper front pillar cover sub-assembly.

      1. Using a heat light, heat the vehicle body and upper front pillar cover sub-assembly.

      2. Remove the release paper from the upper front pillar cover sub-assembly.

         Tip:

         After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. 

         *a	Double-sided Tape

         Engage the 2 claws and 5 clips and attach the double-sided tape to install the upper front pillar cover sub-assembly.

         Tip:

         Press the upper front pillar cover sub-assembly firmly to install it.