FRONT SEAT ASSEMBLY(for Manual Seat) REMOVAL

PROCEDURE


  1. PRECAUTION

    CAUTION:


    • Be sure to read Precaution thoroughly before servicing Click here.

    • If the side airbag was deployed, replace the front seat airbag assembly, separate type front seatback spring assembly, separate type front seatback cover and separate type front seatback pad with the necessary parts in accordance with the extent of the collision damage.

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work Click here.

  2. REMOVE DECK BOARD ASSEMBLY

    Click here

  3. REMOVE NO. 1 DECK BOARD

    Click here

  4. REMOVE NO. 2 DECK BOARD

    Click here

  5. REMOVE REAR DECK FLOOR BOX

    Click here

  6. REMOVE DECK FLOOR BOX RH

    Click here

  7. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) auxiliary battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  8. REMOVE FRONT SEAT HEADREST ASSEMBLY

  9. REMOVE FRONT INNER SEAT TRACK BRACKET COVER


    1. Lift up the seat track adjusting handle and move the seat to the rearmost position.

    2. B005YX5

      Disengage the 2 claws and remove the front inner seat track bracket cover.

  10. REMOVE FRONT OUTER SEAT TRACK BRACKET COVER


    1. B005XW4

      Disengage the 2 claws and remove the front outer seat track bracket cover.

  11. REMOVE REAR INNER SEAT TRACK BRACKET COVER


    1. Lift up the seat track adjusting handle and move the seat to the foremost position.

    2. B005YV1

      Disengage the claw.

    3. Disengage the guide and remove the rear inner seat track bracket cover.

  12. REMOVE REAR OUTER SEAT TRACK BRACKET COVER


    1. B005Y6Z

      Disengage the 2 claws and remove the rear outer seat track bracket cover.

  13. REMOVE FRONT SEAT ASSEMBLY


    1. B005ZED

      Remove the 2 bolts on the rear side of the seat.

    2. Lift up the seat track adjusting handle and move the seat to the rearmost position.

    3. B005Z9R

      Remove the 2 bolts on the front side of the seat.

    4. Lift up the seat track adjusting handle and move the seat to the center position. Also, operate the reclining adjuster release handle and move the seatback to the upright position.

    5. Operate the vertical adjusting handle to move the seat cushion to the upper position.

    6. Disconnect each connector and clamp under the seat.

    7. Remove the front seat assembly.

      Note

      Be careful not to damage the vehicle body.