DOOR CONTROL RECEIVER INSTALLATION

PROCEDURE


  1. INSTALL SMART DOOR CONTROL RECEIVER ASSEMBLY (w/o Tire Pressure Warning System)

    Note


    • Do not drop the smart door control receiver assembly, strike it with tools or subject it to impact.

    • If the smart door control receiver assembly is subjected to an impact, replace it with a new one.


    1. B005PKNC01
      *A for Type A
      *B for Type B

      Connect the connector.

    2. Engage the 2 guides and install the smart door control receiver assembly with the bolt.

      Torque:
      for Type A
      8.3 N*m  { 85 kgf*cm, 73 in.*lbf }
      for Type B
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note

      There are three types of bolts and the tightening torque depends on the type of bolt used as shown in the illustration. Therefore, confirm the tightening torque before installing the bolt.

  2. INSTALL ELECTRICAL KEY AND TIRE PRESSURE WARNING ECU AND RECEIVER (w/ Tire Pressure Warning System)

    Note


    • Do not drop the electrical key and tire pressure warning ECU and receiver, strike it with tools or subject it to impact.

    • If the electrical key and tire pressure warning ECU and receiver is subjected to an impact, replace it with a new one.


    1. B005QG4C02
      *A for Type A
      *B for Type B

      Connect the connector.

    2. Engage the 2 guides and install the electrical key and tire pressure warning ECU and receiver with the bolt.

      Torque:
      for Type A
      8.3 N*m  { 85 kgf*cm, 73 in.*lbf }
      for Type B
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note

      There are three types of bolts and the tightening torque depends on the type of bolt used as shown in the illustration. Therefore, confirm the tightening torque before installing the bolt.

  3. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

  4. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH

    Click here

  5. INSTALL RECLINING REMOTE CONTROL BEZEL RH (w/o Rear Power Seat System)

    Click here

  6. INSTALL FOLD SEAT SWITCH ASSEMBLY (w/ Rear Power Seat System)

    Click here

  7. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

    Click here

  8. INSTALL ROPE HOOK ASSEMBLY

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

  9. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

    Click here

  10. INSTALL REAR FLOOR FINISH SIDE PLATE RH

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

  11. INSTALL REAR SEAT SIDE GARNISH RH

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

  12. INSTALL UPPER QUARTER TRIM PAD RH

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

  13. INSTALL REAR SEAT ASSEMBLY RH

    Click here

  14. INSTALL REAR DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

  15. INSTALL REAR FLOOR FINISH PLATE

    Click here

  16. INSTALL DECK SIDE TRIM BOX RH (except Full Size Spare Tire)

    Click here

  17. INSTALL DECK SIDE TRIM BOX RH (for Full Size Spare Tire)

    Click here

  18. INSTALL DECK FLOOR BOX RH (w/o Spare Tire)

    Click here

  19. INSTALL REAR NO. 4 FLOOR BOARD (except Full Size Spare Tire)

    Click here

  20. INSTALL REAR NO. 4 FLOOR BOARD (for Full Size Spare Tire)

    Click here

  21. INSTALL REAR DECK FLOOR BOX (w/ Spare Tire)

    Click here

  22. INSTALL SPARE WHEEL COVER (for Compact Spare Tire)

    Click here

  23. INSTALL REAR FLOOR CARPET (w/o Spare Tire)

    Click here

  24. INSTALL REAR NO. 3 FLOOR BOARD

    Click here

  25. INSTALL DECK BOARD ASSEMBLY

    Click here

  26. INSTALL TONNEAU COVER ASSEMBLY

    Click here

  27. REGISTER TRANSMITTER ID (w/ Tire Pressure Warning System)

    Click here

  28. INSPECT TIRE PRESSURE WARNING SYSTEM (w/ Tire Pressure Warning System)

    Click here

  29. PERFORM INITIALIZATION (w/ Tire Pressure Warning System)

    Click here