4WD CONTROL ECU(for LHD) INSTALLATION

PROCEDURE

1. INSTALL 4WD ECU ASSEMBLY

   
   

   1. Attach the 2 claws to install 4WD ECU assembly.

2. INSTALL ECU INTEGRATION BOX RH

   
   

   1. Install the ECU integration box RH with the 2 nuts and bolt.

      Torque:

      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

   2. Connect the connectors.

   3. Attach the 4 clamps.

3. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

   Click here

4. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here