VACUUM PUMP(for 1AD-FTV) INSTALLATION

PROCEDURE

  1. INSTALL VACUUM PUMP ASSEMBLY

    1. C165971C01
      V100135

      Engine Oil

      Apply engine oil to 2 new O-rings and install them to the vacuum pump assembly.

    2. C113327C01

      *a

      Coupling Teeth

      *b

      Groove

      Install the vacuum pump assembly so that the coupling teeth of the vacuum pump assembly and groove of the camshaft are engaged.

      Note:

      Ensure that the vacuum pump assembly is installed securely.

    3. C273682

      Install 3 new bolts.

      21 N*m

      214 kgf*cm

      15 ft.*lbf

      Note:

      After tightening the bolts, ensure that the contact surface of the vacuum pump assembly is flush with the cylinder head.

    4. C273681

      Connect the union to connector tube hose to the vacuum pump assembly and slide the clip to secure it.

    5. Connect the vacuum transmitting hose assembly to the vacuum pump assembly.

    6. C273679

      Install the wire harness protector with the bolt and 2 nuts.

      8.0 N*m

      82 kgf*cm

      71 in.*lbf

  2. INSTALL NO. 1 ENGINE COVER

  3. OPERATION CHECK