FRONT POWER SEAT CONTROL SYSTEM(w/ Memory) Wireless-linked Return Function does not Operate

DTC Code DTC Name
Wireless-linked Return Function does not Operate

DESCRIPTION

When a door is unlocked using the wireless unlock function or entry unlock function, the certification ECU (smart key ECU assembly) sends a door unlock signal and key ID signal to the main body ECU (multiplex network body ECU). When the main body ECU (multiplex network body ECU) receives the door unlock signal, it stores the key ID. When the driver door is opened, the memory call and memory command information of the stored key ID is sent to each driving position related control ECU. Each control ECU receives the memory commands and performs the memory call operation according to predetermined control timing values.

CAUTION / NOTICE / HINT

Note:

  • The front power seat control system (w/ Memory) uses the CAN communication system. First, confirm that there is no malfunction in the communication system by checking communication function of the CAN communication system. Refer to the How to Proceed with Troubleshooting procedure.

    Click here

  • When replacing the main body ECU (multiplex network body ECU), make sure to replace it with a new one.

PROCEDURE

  1. CHECK FRONT POWER SEAT CONTROL SYSTEM

    1. Check the operation of the power seats.

      Click here

    2. Check whether seat positions can be stored in memory.

      Click here

    3. Check whether seat positions can be restored.

      Click here

    4. Check the operation of memory call registration.

      Click here

    Result

    Result

    Proceed to

    OK

    A

    NG (power seat operation)

    B

    NG (seat position memory)

    C

    NG (seat position restoring)

    D

    NG (memory call registration)

    E
    B

    GO TO PROBLEM SYMPTOMS TABLE

    Click here

    C

    GO TO OTHER DIAGNOSIS PROCEDURE (Power Seat Position is not Memorized)

    Click here

    D

    GO TO OTHER DIAGNOSIS PROCEDURE (Power Seat does not Return to Memorized Position)

    Click here

    E

    GO TO OTHER DIAGNOSIS PROCEDURE (Wireless Transmitter Memory Function does not Operate)

    Click here

    A

  2. CHECK ENTRY AND START SYSTEM (for Entry Function)

    1. Check the entry unlock function of the entry and start system.

      Click here

      OK

      Entry unlock function is normal.

    Result

    Proceed to

    OK

    NG
    NG

    GO TO ENTRY AND START SYSTEM (for Entry Function)

    Click here

    OK

  3. CHECK WIRELESS UNLOCK FUNCTION

    1. Check the wireless unlock function.

      Click here

      OK

      Wireless unlock function is normal.

    Result

    Proceed to

    OK

    NG
    NG

    GO TO WIRELESS DOOR LOCK CONTROL SYSTEM

    Click here

    OK

  4. REPLACE POSITION CONTROL ECU AND SWITCH ASSEMBLY

    1. Replace the position control ECU and switch assembly.

      Click here

    Result

    Proceed to

    NEXT
    NEXT

  5. CHECK MEMORY CALL FUNCTION

    1. Store a seat position in memory.

      Click here

    2. Perform memory call registration.

      Click here

    3. Turn the power switch off.

    4. Close and lock all doors.

    5. Unlock the driver door by pressing the unlock switch of the memory call registered key or touching the driver door outside handle while holding the memory call registered key.

    6. Open the driver door and check that the driver seat moves to the memorized position.

      Click here

      OK

      Driver seat moves to the memorized position.

    Result

    Proceed to

    OK

    NG
    OK

    END (POSITION CONTROL ECU AND SWITCH ASSEMBLY WAS DEFECTIVE)

    NG

    REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)