DRIVE SHAFT / PROPELLER SHAFT SERVICE DATA
Standard drive shaft length |
for 1AD-FTV (Manual Transaxle) |
LH Side |
553.6 mm (1.82 ft.) |
RH Side |
932.4 mm (3.06 ft.) |
||
for 2AR-FE (Automatic Transaxle) |
LH Side |
577.6 mm (1.89 ft.) |
|
RH Side |
914.4 mm (3.00 ft.) |
||
for 2AR-FE (Manual Transaxle) |
LH Side |
583.6 mm (1.91 ft.) |
|
RH Side |
906.4 mm (2.97 ft.) |
||
for 3ZR-FE (Manual Transaxle) |
LH Side |
594.6 mm (1.95 ft.) |
|
RH Side |
893.4 mm (2.93 ft.) |
||
for 3ZR-FE (CVT) |
LH Side |
591.2 mm (1.94 ft.) |
|
RH Side |
890.0 mm (2.92 ft.) |
||
Front drive shaft dust cover |
Standard distance |
w/o Drive Shaft Bearing Case |
41.6 to 42.6 mm (1.638 to 1.677 in.) |
w/ Drive Shaft Bearing Case |
|||
Front drive shaft dust cover RH |
Standard distance |
for 1AD-FTV (Manual Transaxle) |
110.0 to 111.0 mm (4.331 to 4.370 in.) |
for 2AR-FE (Automatic Transaxle) |
|||
for 2AR-FE (Manual Transaxle) |
91.0 to 92.0 mm (3.583 to 3.622 in.) |
||
for 3ZR-FE (Manual Transaxle) |
|||
for 3ZR-FE (CVT) |
|||
Front drive shaft damper LH |
Standard distance |
for 1AD-FTV (Manual Transaxle) |
158.0 to 162.0 mm (6.221 to 6.377 in.) |
for 2AR-FE (Automatic Transaxle) |
|||
for 2AR-FE (Manual Transaxle) |
- |
||
for 3ZR-FE (Manual Transaxle) |
- |
||
for 3ZR-FE (CVT) |
161.0 to 165.0 mm (6.339 to 6.496 in.) |
||
Front drive shaft damper RH |
Standard distance |
for 1AD-FTV (Manual Transaxle) |
- |
for 2AR-FE (Automatic Transaxle) |
161.0 to 165.0 mm (6.339 to 6.496 in.) |
||
for 2AR-FE (Manual Transaxle) |
- |
||
for 3ZR-FE (Manual Transaxle) |
- |
||
for 3ZR-FE (CVT) |
- |
||
Standard grease capacity |
Outboard joint |
for 1AD-FTV (Manual Transaxle) |
205 to 215 g (7.3 to 7.5 oz) |
for 1AD-FTV (Manual Transaxle) |
|||
for 2AR-FE (Manual Transaxle) |
|||
for 3ZR-FE (Manual Transaxle) |
|||
for 3ZR-FE (CVT) |
171 to 181 g (6.1 to 6.3 oz) |
||
Inboard joint |
- |
175 to 185 g (6.2 to 6.5 oz) |
Standard drive shaft length |
for 2AD-FTV, 2AD-FHV (Automatic Transaxle) |
LH Side |
565.6 mm (1.86 ft.) |
RH Side |
928.4 mm (3.05 ft.) |
||
for 1AD-FTV, 2AD-FTV, 2AD-FHV (Manual Transaxle) |
LH Side |
553.6 mm (1.82 ft.) |
|
RH Side |
933.9 mm (3.06 ft.) |
||
for 2AR-FE (Automatic Transaxle) |
LH Side |
577.6 mm (1.89 ft.) |
|
RH Side |
922.4 mm (3.03 ft.) |
||
for 2AR-FE (Manual Transaxle) |
LH Side |
583.6 mm (1.91 ft.) |
|
RH Side |
909.4 mm (2.98 ft.) |
||
for 3ZR-FE, 3ZR-FAE (Manual Transaxle) |
LH Side |
594.6 mm (1.95 ft.) |
|
RH Side |
896.4 mm (2.94 ft.) |
||
for 3ZR-FE, 3ZR-FAE (CVT) |
LH Side |
591.2 mm (1.94 ft.) |
|
RH Side |
881.9 mm (2.89 ft.) |
||
Front drive shaft dust cover RH |
Standard distance |
- |
103.5 to 104.5 mm (4.075 to 4.114 in.) |
Front drive shaft damper LH |
Standard distance |
for 2AD-FTV, 2AD-FHV (Automatic Transaxle) |
158.0 to 162.0 mm (6.221 to 6.377 in.) |
for 1AD-FTV, 2AD-FTV, 2AD-FHV (Manual Transaxle) |
|||
for 2AR-FE (Automatic Transaxle) |
|||
for 2AR-FE (Manual Transaxle) |
- |
||
for 3ZR-FE, 3ZR-FAE (Manual Transaxle) |
- |
||
for 3ZR-FE, 3ZR-FAE (CVT) |
161.0 to 165.0 mm (6.339 to 6.496 in.) |
||
Front drive shaft damper RH |
Standard distance |
- |
161.0 to 165.0 mm (6.339 to 6.496 in.) |
Standard grease capacity |
Outboard joint |
for 2AD-FTV, 2AD-FHV (Automatic Transaxle) |
205 to 215 g (7.3 to 7.5 oz) |
for 1AD-FTV, 2AD-FTV, 2AD-FHV (Manual Transaxle) |
|||
for 2AR-FE (Automatic Transaxle) |
|||
for 2AR-FE (Manual Transaxle) |
|||
for 3ZR-FE, 3ZR-FAE (Manual Transaxle) |
|||
for 3ZR-FE, 3ZR-FAE (CVT) |
171 to 181 g (6.1 to 6.3 oz) |
||
Inboard joint |
- |
175 to 185 g (6.2 to 6.5 oz) |
Standard drive shaft length |
LH Side |
733.2 mm (2.40 ft.) |
RH Side |
||
Standard drive shaft boot clamp clearance |
Rear drive shaft outboard joint boot clamp LH |
1.2 mm (0.0472 in.) or less |
Rear No. 2 drive shaft outboard joint boot clamp LH |
- |
|
Rear drive shaft inboard joint boot clamp LH |
||
Rear No. 2 drive shaft inboard joint boot clamp LH |
||
Standard grease capacity |
Outboard joint |
55 to 65 g (2.0 to 2.2 oz) |
Inboard joint |
77 to 87 g (2.8 to 3.0 oz) |
Propeller shaft runout |
Front Side |
0.4 mm (0.0157 in.) |
Rear Side |
||
No. 1 Joint Angle |
for 2AD-FTV, 2AD-FHV (Automatic Transaxle) |
-2°31' +/- 60' |
for 1AD-FTV, 2AD-FTV, 2AD-FHV (Manual Transaxle) |
-2°27' +/- 60' |
|
for 2AR-FE (Automatic Transaxle) |
-2°29' +/- 60' |
|
for 2AR-FE (Manual Transaxle) |
-2°29' +/- 60' |
|
for 3ZR-FE, 3ZR-FAE (Manual Transaxle) |
-2°13' +/- 60' |
|
for 3ZR-FE, 3ZR-FAE (CVT) |
-2°28' +/- 60' |
|
No. 2 Joint Angle |
for 2AD-FTV, 2AD-FHV (Automatic Transaxle) |
2°05' +/- 1°30' |
for 1AD-FTV, 2AD-FTV, 2AD-FHV (Manual Transaxle) |
1°35' +/- 1°30' |
|
for 2AR-FE (Automatic Transaxle) |
2°04' +/- 1°30' |
|
for 2AR-FE (Manual Transaxle) |
2°04' +/- 1°30' |
|
for 3ZR-FE, 3ZR-FAE (Manual Transaxle) |
1°02' +/- 1°30' |
|
for 3ZR-FE, 3ZR-FAE (CVT) |
1°35' +/- 1°30' |
|
No. 3 Joint Angle |
for 2AD-FTV, 2AD-FHV (Automatic Transaxle) |
2°01' +/- 60' |
for 1AD-FTV, 2AD-FTV, 2AD-FHV (Manual Transaxle) |
2° 04'+/- 60' |
|
for 2AR-FE (Automatic Transaxle) |
2°01' +/- 60' |
|
for 2AR-FE (Manual Transaxle) |
2°01' +/- 60' |
|
for 3ZR-FE, 3ZR-FAE (Manual Transaxle) |
2°23' +/- 60' |
|
for 3ZR-FE, 3ZR-FAE (CVT) |
2° 04'+/- 60' |
|
Center support bearing washer |
Thickness |
2.0 mm (0.0787 in.) |
4.5 mm (0.1772 in.) |
||
6.5 mm (0.2559 in.) |